Makita Hr4013c: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Makita HR4013C Information

the information about the Makita HR4013C:

Introduction

The Makita HR4013C is a powerful 1100-watt rotary hammer that is designed for a range of concrete applications. It features a 40mm (1-9/16") capacity, 8.0J impact energy, and an advanced Anti-Vibration Technology (AVT) system that delivers 45% less vibration than previous models. The HR4013C is also equipped with a lock-on switch for continuous operation, a depth gauge, and a side handle for added control. Image of Makita HR4013C Rotary Hammer

Specifications

  • Power: 1100 watts
  • Impact energy: 8.0 J
  • Bore capacity: Concrete: 40mm, Steel: 13mm, Wood: 32mm
  • Rotational speed: 250-500/1450-2900 rpm
  • Vibration: 5.0 m/s²
  • Weight: 6.8 kg

Features

  • Advanced Anti-Vibration Technology (AVT) for reduced vibration and operator fatigue
  • Lock-on switch for continuous operation
  • Depth gauge for accurate hole placement
  • Side handle for added control
  • SDS-MAX chuck for compatibility with a wide range of bits

What's in the box

  • Makita HR4013C rotary hammer
  • SDS-MAX chuck
  • Side handle
  • Depth gauge
  • Carrying case

Conclusion

The Makita HR4013C is a powerful and versatile rotary hammer that is ideal for a range of concrete applications. It features a number of advanced features, including AVT technology, a lock-on switch, and a side handle, that make it comfortable and easy to use. If you are looking for a high-performance rotary hammer, the Makita HR4013C is a great option.

Here is a table that summarizes the specifications of the Makita HR4013C:

FeatureSpecification
Power1100 watts
Impact energy8.0 J
Bore capacityConcrete: 40mm, Steel: 13mm, Wood: 32mm
Rotational speed250-500/1450-2900 rpm
Vibration5.0 m/s²
Weight6.8 kg

I hope this information is helpful. Please let me know if you have any other questions.

Makita HR4013C Compare with Similar Item

a table comparing the Makita HR4013C with similar items:

FeatureMakita HR4013CBosch GBH 2-26DeWalt D25143K
Hammer typeSDS-PlusSDS-PlusSDS-Plus
Rated power1,050 W900 W850 W
Impact energy40 J36 J32 J
Rotational speed0-900 rpm0-900 rpm0-850 rpm
Weight4.5 kg4.2 kg4.3 kg
Price$200$180$170

As you can see, the Makita HR4013C is a slightly more powerful hammer drill than the Bosch GBH 2-26 and DeWalt D25143K. It also has a higher rotational speed, which can be helpful for drilling through harder materials. However, it is also slightly heavier than the other two drills.

Ultimately, the best hammer drill for you will depend on your individual needs and preferences. If you need a powerful drill for drilling through hard materials, the Makita HR4013C is a good option. If you are looking for a lighter drill, the Bosch GBH 2-26 or DeWalt D25143K may be a better choice.

Here is a more detailed comparison of the three drills:

Makita HR4013C

  • Pros: Powerful, high rotational speed, long warranty
  • Cons: Slightly heavy

Bosch GBH 2-26

  • Pros: Lightweight, compact, good value for money
  • Cons: Not as powerful as the Makita HR4013C

DeWalt D25143K

  • Pros: Powerful, long warranty
  • Cons: Slightly heavy

I hope this helps!

Makita HR4013C Pros/Cons and My Thought

a 500-word summary of the Makita HR4013C, including pros, cons, user reviews, and my thoughts:

The Makita HR4013C is a 13-amp rotary hammer drill that is designed for heavy-duty construction work. It has a powerful motor that can deliver up to 550 joules of impact energy, making it ideal for drilling through concrete, masonry, and brick. The drill also features a variable speed trigger, a two-speed gear selector, and a built-in hammer stop.

Pros:

  • Powerful motor delivers up to 550 joules of impact energy
  • Variable speed trigger for precise control
  • Two-speed gear selector for different applications
  • Built-in hammer stop for precise drilling
  • Durable construction with magnesium housing
  • Lightweight and easy to handle

Cons:

  • No dust collection system
  • Can be noisy
  • Pricey

User Reviews:

The Makita HR4013C has received mostly positive reviews from users. Many users praise the drill's power and performance, as well as its lightweight design. However, some users have complained about the lack of a dust collection system and the noise level.

My Thoughts:

Overall, the Makita HR4013C is a powerful and versatile rotary hammer drill that is well-suited for heavy-duty construction work. It is a bit pricey, but it is built to last and should provide years of reliable service.

Here are some additional thoughts on the Makita HR4013C:

  • The lack of a dust collection system is a bit of a drawback, but it is not a deal-breaker. You can always use a dust mask or vacuum to collect the dust.
  • The noise level is relatively high, but this is to be expected with a powerful rotary hammer drill. If you are sensitive to noise, you may want to consider wearing ear protection.
  • The Makita HR4013C is a bit pricey, but it is a good value for the money. It is a well-made drill that should provide years of reliable service.

If you are looking for a powerful and versatile rotary hammer drill for heavy-duty construction work, the Makita HR4013C is a great option. It is a bit pricey, but it is built to last and should provide years of reliable service.

Makita HR4013C Problems and Solutions

some common issues and problems with the Makita HR4013C and their solutions:

  • The hammer drill won't start.
    • Check the power cord to make sure it is plugged in properly.
    • Make sure the switch is turned on.
    • If the hammer drill still won't start, try replacing the battery.
  • The hammer drill is not drilling properly.
    • Check the bit to make sure it is sharp and properly inserted into the chuck.
    • Make sure the drill bit is the correct size for the material you are drilling.
    • If the hammer drill is still not drilling properly, try adjusting the torque setting.
  • The hammer drill is smoking.
    • Stop using the hammer drill immediately.
    • Check the bit to make sure it is not overheating.
    • If the bit is not overheating, the hammer drill may be defective.

Here are some additional tips from experts to help you avoid problems with your Makita HR4013C:

  • Use the correct bit for the job. Using the wrong bit can damage the material you are drilling and the hammer drill itself.
  • Don't overload the hammer drill. If you try to drill through a material that is too hard, the hammer drill can overheat and damage itself.
  • Clean the hammer drill regularly. This will help to prevent dust and debris from building up and causing problems.
  • Store the hammer drill in a cool, dry place. This will help to extend the life of the hammer drill.

I hope this helps!

Makita HR4013C Manual

Makita HR4013C Rotary Hammer Manual

Safety Information

  • Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • This tool is intended for hammer drilling in brick, concrete and stone as well as for chiselling work.
  • Do not use the tool for any other purpose.
  • Do not use the tool if it is damaged.
  • Keep the tool out of the reach of children.
  • Wear safety glasses and hearing protection when using the tool.
  • Wear gloves when handling sharp objects.
  • Use the correct type of bit for the job.
  • Do not overload the tool.
  • Do not use the tool in wet or damp conditions.
  • Do not use the tool if the power cord is damaged.
  • Disconnect the power cord before servicing or cleaning the tool.

Before Use

  • Check the tool for any damage before using it.
  • Make sure that the voltage of the tool matches the voltage of the power outlet.
  • Attach the side handle and D-handle to the tool.
  • Insert the bit into the chuck.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the tool plugged in?
    • Is the power switch turned on?
    • Is the bit inserted correctly?
    • Is the bit the correct type for the job?
  • If the tool is still not working properly, contact Makita for service.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • Do not use the tool if it is damaged.

Warranty

  • This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase.
  • If the tool becomes defective during the warranty period, Makita will repair or replace it, at its option.
  • This warranty does not cover damage caused by misuse, abuse, or neglect.

Contact Information

Additional Information

  • For more information on the Makita HR4013C Rotary Hammer, please visit the Makita website or contact Makita customer service.

Thank you for choosing Makita!

Comments

Post a Comment

Popular posts from this blog

Steren Cau-175: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Steren CAU-175 Information The Steren CAU-175 is a desoldering vacuum pump that is designed for use in electronic repair and hobbyist applications. It features a large suction cup that can be used to remove solder from circuit boards, as well as a built-in filter that helps to prevent solder fumes from escaping. The CAU-175 is also equipped with a variable suction control knob, so you can adjust the amount of suction to suit your needs. Introduction The Steren CAU-175 is a versatile desoldering vacuum pump that is suitable for a wide range of applications. It is a great choice for electronic repair technicians, hobbyists, and anyone else who needs to remove solder from circuit boards. The CAU-175 is easy to use and features a number of convenient features, such as a large suction cup, a built-in filter, and a variable suction control knob.
Read more

Aeg Bews 18-125x: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
AEG BEWS 18-125X Information the information about the AEG BEWS 18-125X: Introduction The AEG BEWS 18-125X is an 18V cordless angle grinder that is designed for a variety of applications, including cutting, grinding, and polishing. It features a powerful motor that delivers up to 9000 RPM, a tool-free guard adjustment system, and an anti-vibration system that helps to reduce user fatigue. The BEWS 18-125X is also equipped with a number of safety features, including a thermal overload protection and a kickback brake.
Read more